畜牧风机系列 >> 推拉式风机 >> 推拉式风机
推拉式风机 

 

■主要性能特点
◆采用独特的推开百叶机构装置能自动打开和关闭百叶窗叶片;
◆采用不锈钢扇叶片一次冲压成型工艺,不变形、不断裂、美观耐用高精度动平衡检测校正,保证风机运转平稳无振动降低噪音,有效提高使用寿命;
◆采用特有的凹进式风机搬运提手设计,不但有效避免装卸、搬运过程中的不便,还不会影响风机安装和外观效果;
◆V型皮带轮由高强度的铝镁合金材料热压铸成型,材质轻、强度高;
◆我厂风机可根据经销商的销售情况定制A型皮带或B型皮带,有效满足不同客户的需求;
◆配置高效节能电机,通过3C认证,防护等级:IP55,绝缘等级:F级;
◆机械离心式打开机构采用韧性高的增强尼龙100%原料注塑加工,强度高、寿命长:导杆内嵌的钢件安装在叶轮上,增强了机构的可靠性,有效避免尼龙生产过程的伸缩变动。
JXS系列风机技术参数

型号规格 
Model
specifi-cations

风叶直径 
Diameter
biades
(mm)

频率 
Fre-quency
(Hz)

电机转速 
(转/分) 
Motor
Rotational speed rpm

风量 
Air
flow
(m ³/h)

输入功率 
(W) 
Import
power

噪音 
(分贝) 
Noise
deci-bels

额定电压 
(V) 
Rated
voltage

 
(mm)
Hei-ght

 
(mm) 
Wid
th

 
(mm) 
Thick-ness

JXS-1000

960(36in)

50

≥1400

23500

750

≤64

380

1000

1000

450

JXS-1380

1270(50in)

50

≥1400

48000

1100

≤64

380

1380

1380

450


金旭系列一推拉式风机
JXS SERIES SERIES PUSH-PULL CENTRIFUAL FAN
Features:
Frame, frames are made of galvanized board, thickness l.Omm,galvanizing layer 120g/㎡.
Blade, 6 pieces of blades and all the blades are made by 430/201/304 stainless steel, mirror face
Impeller. casting aluminum alloy impeller.
Bearing of impeller, permanently sealed bearing.
Venture, galvanized board, thickness l.Omm.
Inlet wind protecting net, spraying paint steel wire. thickness 2.8mm.
Electrical motor, national-grade aluminum alloy frame motor, 380V, 1.1KW, 50Hz, 3-phase, 4-pole speed, 1410r/m,
IP55, class F, efficiency 90%, top/foot mounted, certification, CCC.(motor can be supplied as demand)
Motor bearing: national grade.
V-belt, A -type belt, imported from Korea,Add Japan.
Shutters, galvanized board, 0 8 mm thickness while the middle piece thickness l.Omm. Galvanizing layer ,120kg㎡.
Opening system, push-pull centrifugal opening system.
Rivets, aluminum alloy and stainless steel rivets.
Cable, 1 meter long, strong robber wire.
Warranty offer, 1 year for the whole machine.
主要部件:
 
 
 
铝镁合金材质皮带自动涨紧装置,不变形、使用寿命长;采用皮带内侧涨紧,有效避免皮带反相扭曲。
Belt tensioner which is made of ajuminum magnesium alloy can extend service life and avoid distortion.Tension inside of belt could avoid twisting inverse
尼龙导向杆直接安装在法兰片上,有效避免尼龙的变形伸缩,保证前后轴承完全同心。
Nylon oriented poles are fixed on Ihe flange which could avoid distnrjcjn of nylon and guarantee total concentricitv of front and back bearings
凹进式搬运提手设计使风机装卸、搬运方便同时不影响安装和外观效果。
Handles are designed as rccessed type, easy to carry.transport and have no effect on instaIJation and outiook

JXS系列风机排风量(m ³/小时)

阻力

0帕(Pa)

10帕(Pa)

20帕(Pa)

30帕(Pa)

40帕(Pa)

50帕(Pa)

JXS-T1250

44600

42900

40950

38850

37150

35160

JXS-T900

25000

24000

22900

21800

20800

19700


 

 


点击:3122  录入时间:2014-12-15 【打印此页】 【返回
 
敬请您的留言 共找到 0 条留言

 
 
姓名: 选择头像
性别: 先生  女士
联系电话: (必须是11位数字电话或者手机都可以)
E-mail:
您的留言:
验证码: 2406 (必须填写)